error in selecting virtual disk mode when importing configuration from express mode

[priuser]

error in selecting virtual disk mode when importing configuration from express mode

steps to reproduce:

1. create radmrive with direct-mode
2. export config - dio.vdd (save file)
3. new disk from configuration - dio.vdd (load file) @ "express mode" - create ;

3_proc.png (36.89 KiB) Viewed 2977 times

actual result:
look at window (mode) - "scsi virtual disk"

4_proc.png (32.64 KiB) Viewed 2977 times

expected result:
"direct-io virtual disk"

---

1. create radmrive with direct-mode
2. export config - dio.vdd (save file)
3. new disk from configuration - dio.vdd (load file) @ "advanced mode" - create

alt-1_proc.png (29.62 KiB) Viewed 2977 times

actual result:
"direct-io virtual disk"

expected result:
"direct-io virtual disk"

all fine

[Support]

I'm sorry for the late reply! In fact, this is not a bug, but a design problem that can easily be misleading. "New Disk From Configuration" actually means the importing the saved configuration to the "Create New Disk" wizard dialog. At express mode the dialog only has the basic settings and simple image settings, then only these settings are imported from the configuration file, other ramdisk settings uses the dialog default values instead of values from the configuration file.

To eliminate this misleading problem, a workaround we considered is to force the advanced mode when importing the configuration file.

Thank you for pointing out this issue!