Hi, remember.
I installed v1.0.1 and very good while reboot system. But shutdown and switch on the PC and death screen appears. Error on driver .sys XPx64 SP2.
Anew unistall this software and wait a new version.
Good job!
New death screen v1.0.1
Re: New death screen v1.0.1
Did you find a minidump for this blue screen? And your cache settings? Thanks.
Re: New death screen v1.0.1
Settings:
In blue screen appears:
rxfcv.sys
PAGE:FAULT_IN_NONPAGED_AREA
Technical information:
STOP: 00000050 (0xFFFFFADFAAEAF000,0X0000000000000001,0XFFFFFADFB0697FB0,0X000000000000000)
RXFCV.SYS - ADRESS FFFFFADFB0697FB0 base at FFFFFADFB0684000 datestamp 534e9868
I activated pagefile because not generate dump files. Normally job without pagefile system. Pending new death screen.
In blue screen appears:
rxfcv.sys
PAGE:FAULT_IN_NONPAGED_AREA
Technical information:
STOP: 00000050 (0xFFFFFADFAAEAF000,0X0000000000000001,0XFFFFFADFB0697FB0,0X000000000000000)
RXFCV.SYS - ADRESS FFFFFADFB0697FB0 base at FFFFFADFB0684000 datestamp 534e9868
I activated pagefile because not generate dump files. Normally job without pagefile system. Pending new death screen.
Re: New death screen v1.0.1
Hello, new crash.
Only start OS later open in safe mode and restart, the L2 storage full lost. Minidump not generated
Event viewer:
Tipo de suceso: Error
Origen del suceso: FancyCcV
Categoría del suceso: Ninguno
Id. suceso: 1
Fecha: 23/04/2014
Hora: 15:00:00
Usuario: No disponible
Equipo: ----
Descripción:
PrimoCache driver was not loaded correctly.
Datos:
0000: 00 00 08 00 01 00 62 00 ......b.
0008: 00 00 00 00 01 00 06 e0 .......à
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 60 90 2d b9 df fa ff ff `-¹ßúÿÿ
Not to do
Only start OS later open in safe mode and restart, the L2 storage full lost. Minidump not generated
Event viewer:
Tipo de suceso: Error
Origen del suceso: FancyCcV
Categoría del suceso: Ninguno
Id. suceso: 1
Fecha: 23/04/2014
Hora: 15:00:00
Usuario: No disponible
Equipo: ----
Descripción:
PrimoCache driver was not loaded correctly.
Datos:
0000: 00 00 08 00 01 00 62 00 ......b.
0008: 00 00 00 00 01 00 06 e0 .......à
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 60 90 2d b9 df fa ff ff `-¹ßúÿÿ
Not to do
Re: New death screen v1.0.1
This event is expected because primocache doesn't load its driver in the safe boot mode by design.Turi wrote:Event viewer:
We have checked it. But so far we have no idea on the cause. It would be better if there is a minidump file generated.Turi wrote:STOP: 00000050 (0xFFFFFADFAAEAF000,0X0000000000000001,0XFFFFFADFB0697FB0,0X000000000000000)RXFCV.SYS - ADRESS FFFFFADFB0697FB0 base at FFFFFADFB0684000 datestamp 534e9868
The following link is for your reference if there is still no minidump file generated.
http://www.romexsoftware.com/en-us/know ... -file.html
BTW, can you send us your hardware configurations? And what is your level-2 storage?
Thanks!
Re: New death screen v1.0.1
The L2 cache are in SDD 16GB with eSATA port. One USB port powered the wire for SSD.
Yesterday, desactivated all USB ports power save mode, and when it goes well. No blue screen.
Maybe the SSD no powered for motherboard when needed.
Continue testing.
Yesterday, desactivated all USB ports power save mode, and when it goes well. No blue screen.
Maybe the SSD no powered for motherboard when needed.
Continue testing.
Re: New death screen v1.0.1
Nothing, new blue screen, USB power discarded.
I followed the instructions but I do not get to force minidump.
The PC:
Core 2 Duo 8400
GMA4500
3GB RAM
OS XP x64 SP2
I appreciated that the blue screen appears when more than 1GB writing on L2 cache, currently 5GB total. Depends on usage, sometimes the system fails before other, also reboot system.
I followed the instructions but I do not get to force minidump.
The PC:
Core 2 Duo 8400
GMA4500
3GB RAM
OS XP x64 SP2
I appreciated that the blue screen appears when more than 1GB writing on L2 cache, currently 5GB total. Depends on usage, sometimes the system fails before other, also reboot system.
Re: New death screen v1.0.1
I have tried several days with reduced size L2 cache MAX to 4096MB on the same initial storage space 5GB. ¡And job fine!
It seems that selecting maximum size fault...
It seems that selecting maximum size fault...
Re: New death screen v1.0.1
Thanks for the information!Turi wrote:I have tried several days with reduced size L2 cache MAX to 4096MB on the same initial storage space 5GB. ¡And job fine!