L2 cache verified after every reboot?

FAQ, getting help, user experience about PrimoCache
Post Reply
0ldman
Level 2
Level 2
Posts: 5
Joined: Mon May 24, 2021 6:43 pm

L2 cache verified after every reboot?

Post by 0ldman »

I've got Primocache 4.2.0, NVME as L2, 12GB of L1. After every reboot, even a clean reboot, it is verifying the cache, which bogs the system down horribly.

I don't reboot often so I thought it was a fluke but I've reboot ~5 times today and it's run every single time.

Any advice would be appreciated.
User avatar
Support
Support Team
Support Team
Posts: 3623
Joined: Sun Dec 21, 2008 2:42 am

Re: L2 cache verified after every reboot?

Post by Support »

Please check followings.
1) There was no ungraceful shutdown.
2) You didn't install a cracked version/patch of PrimoCache or Primo Ramdisk before. The crack version may have something remaining in your computer and cause this issue even you have uninstalled it.
3) No write-protect on the C drive (system partition) or the Windows registry.
4) The option "Volatile Cache Contents" in the Advanced Level-2 Cache Settings" dialog is not checked.
5) Level-2 storage drive is not in Windows Storage Pool.
6) Turn off Windows Fast Startup if above doesn't work.You can turn it off in the PrimoCache Options dialog.
Post Reply