Windows 10 freeze with usb caching

[ciakko]

PrimoCache version: 2.7.0
Cache Settings: read only with usb as l2 cache
Windows OS: 10 v1607
Hardware Information (CPU/Motherboard/Memory/Harddisks):
PC - Laptop Asus K501UX
CPU - 17 6500U
RAM - 12GB
USB (cache) - Verbatim Store n go 115Gb
Description:
When cache reach 50/60%, system become instable with freaquent freeze when I open a window or lounch a software.
My usb seems to load 100%.
Thanks for any help

[ciakko]

cache.jpg (74.73 KiB) Viewed 7445 times

[Support]

Is your usb device 2.0 or 3.0+?
And does the following link help?
viewtopic.php?f=34&t=4172#p10337

[ciakko]

Hi, it's an USB 3.0 400Mb read, 200Mb write.
That topic refers to a sata driver, I use an USB. However I check I don't have that driver.

[ciakko]

The USB stick continues to work 100% even if the cache is paused, it only stop when I cancel the task created.

[ciakko]

I update this topic saying that I had tested Primo Cache with two different machines, a desktop with Windows 7 and a laptop with Windows 10, and two different Usb 3.0 pen drive.
I also removed ReadyBoost, ReadyBoot and Prefetch. I made lots of test with different situations with different hard driver settings and Primo Cache settings. I'm pretty sure the ultimate version and the versione before does not work well with USB pens.
When cache hits reach the 80% system start freezing.
Please fix it.

[Support]

How about if you assign 512MB or 1GB for L1 instead of using L2 only?

[ciakko]

It doesn't help. I sent an email with a video of what happens.

[InquiringMind]

Ciakko,

If you haven't already done so, try checking your USB drive using one of the tools mentioned in Raymond.cc: 3 Tools to Check and Test USB Flash Drive just to rule out a faulty stick.

[ciakko]

Yes I made many benchmark test. This is the last one: