Romex Software Forum

We're glad that PrimoCache desktop edition 2.6.0 is released now!

You may download it from the following page.
https://www.romexsoftware.com/en-us/pri ... nload.html

For the change log, please see
https://www.romexsoftware.com/en-us/pri ... gelog.html

Thank you for all your kind support!

I was hoping this new version would solve my issue here: https://www.romexsoftware.com/bbs2/en-u ... =33&t=4077

Unfortunately it didn't. Is there anything to expect to solve it?

@points, I'm sorry that I forgot to follow up that topic. So far PrimoCache only works on the volume level, it cannot work if an encrypted disk has no volumes shown.

Just me or did the GUI take a turn for the worse? I didn't mind having to adjust the width of the columns so I could read them. But on the main status page some of them can't be widened and remain largely unreadable. And the buttons up top have shrunk. I'm on 3840 x 2160 UHD Sony TV/monitor so maybe you didn't account for that? The older version was fine though.

Can you make a screenshot or take a photo for the error things?
And what's your Windows version? 32bit or 64bit?

You can download the v2.5.0 GUI program from the following link. It's ok to just replace the v2.6.0 GUI program.

For 64bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe

For 32bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe

support wrote:Can you make a screenshot or take a photo for the error things?
And what's your Windows version? 32bit or 64bit?

Windows 10, 64bit. Here's a screenshot.

How about if you right click on the execute file and set the compatibility mode to "Windows vista" in the "Compatibility" tab?

support wrote:You can download the v2.5.0 GUI program from the following link. It's ok to just replace the v2.6.0 GUI program.

For 64bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe

For 32bit Windows
https://www.romexsoftware.com/download/ ... ncyCcV.exe

Thanks, that works great, and my eyes thank you as well!

I also replaced the new GUI in the program folder with this one, so I still can just click on my desktop shortcut for the GUI to come up.

support wrote:How about if you right click on the execute file and set the compatibility mode to "Windows vista" in the "Compatibility" tab?

I just now tried that, and all the other modes, but it made no difference.