Seagate SSDHD 2 TB drive and Primo Cache: Conflicts of Cache?
Posted: Thu Jun 30, 2016 12:37 am
I want to know if there is a conflict with using a SSDHD type drive like my new Seagate 2TB. It showed 172 GBs in cache on primo and unreal speed tested in Crystal Hd tester. But I suspect it is in conflict with the HD cache. main game would not boot on steam and when Primo task was removed it dropped on Crystal to super low.
After a few changes with settings it boots games and seems to work fine and fast.. just wondering if the SSDHD 8GB HD cache will conflict with the Primo Cache. I checked Volatile Cache Contents..unchecked Start at Windows Boot. I may play around with these to see if goes back to bugs.
Question is: Could there be a Cache conflict with an SSDHD and it's stupid small from 2013 Cache of 8 lousy GBs unchanged and using Primo Cache? I do have wildly high Total Reads sometimes now with my 45 GB SSD LEVEL 2 ...sometimes over 200 GBs!
After a few changes with settings it boots games and seems to work fine and fast.. just wondering if the SSDHD 8GB HD cache will conflict with the Primo Cache. I checked Volatile Cache Contents..unchecked Start at Windows Boot. I may play around with these to see if goes back to bugs.
Question is: Could there be a Cache conflict with an SSDHD and it's stupid small from 2013 Cache of 8 lousy GBs unchanged and using Primo Cache? I do have wildly high Total Reads sometimes now with my 45 GB SSD LEVEL 2 ...sometimes over 200 GBs!