Romex Software Forum

Posted: **Sat Jul 18, 2015 5:06 am**

PrimoCache version:2.0.0
Cache Settings:L1 32GB, 32KB Block Size, Read/Wrtie Cache Strategy, 300 sec defer write, prefetch last case at windows boot, lock cache not enabled
Windows OS:Windows 8.1 64Bit
Hardware Information (CPU/Motherboard/Memory/Harddisks):LSI RAID
Description: Prefetch is only at 2.05GB out of the 32GB cache. I would like all 32GB to be loaded at startup, i understand that this will cause some start up delays

Posted: **Sat Jul 18, 2015 9:59 am**

Did "Prefetch" in the statistics show "Done (2.05GB/32GB)"? Can you post a screenshot?

In order to not affect the normal Windows/Applications operations, PrimoCache prefetchs data only when Windows is idle.

Posted: **Sun Jul 19, 2015 2:03 pm**

: pc.png (11.85 KiB) Viewed 6619 times

Posted: **Mon Jul 20, 2015 8:19 am**

Does it always stop prefetching at ~2GB each time the computer restarts?

Posted: **Mon Jul 20, 2015 8:29 am**

When level-1 cache is full, PrimoCache will stop prefetching.
So can you check if this issue is related to the above rule?

Romex Software Forum

Prefetch limited to 2.05GB

Prefetch limited to 2.05GB

Re: Prefetch limited to 2.05GB

Re: Prefetch limited to 2.05GB

Re: Prefetch limited to 2.05GB

Re: Prefetch limited to 2.05GB