Page 2 of 2
Re: Support Windows Server 2019 Core ? (and other questions)
Posted: Thu Oct 08, 2020 3:21 am
by cyr0nk0r
ok, so rather than trial and error, can you shed some light on the 2nd part of the above question. from the CLI what is the recommended configuration. just leave out the -m switch? -m 0 ?
There are no examples in the documentation to cover a no L1 cache scenario.
Re: Support Windows Server 2019 Core ? (and other questions)
Posted: Thu Oct 08, 2020 11:10 am
by Support
Both are ok.
Re: Support Windows Server 2019 Core ? (and other questions)
Posted: Thu Oct 08, 2020 3:52 pm
by cyr0nk0r
For anyone else, if you go with this config, and you want different r/w cache percentages with the -r switch you will still need to specify an integer for the L1 percentage even though there won't be an L1 cache. The -r switch format has to be L1,L2.
Example:
rxpcc.exe new -v E -l <guid> -r 0,90 -b 512 -w 120 -a average
Code: Select all
New Cache Task Configuration
----------------------------
Level-1 Cache: 0MB
Level-2 Cache: 5116MB
R/W Ratio: R 10%, W 90%
Storage: {9E339F22-9A19-4722-B276-EE41C4F97951}
Gather Interval: DEFAULT
Options: -
Block Size: 512KB
Defer-Write: Enabled
Latency: 120s
Mode: Average
Options: -
Prefetch: Disabled
Overhead: 1MB (Min), 9MB (Max)
Volume: #9