New death screen v1.0.1

[Turi]

Hi, remember.

I installed v1.0.1 and very good while reboot system. But shutdown and switch on the PC and death screen appears. Error on driver .sys XPx64 SP2.

Anew unistall this software and wait a new version.

Good job!

[Support]

Did you find a minidump for this blue screen? And your cache settings? Thanks.

[Turi]

Settings:



In blue screen appears:

rxfcv.sys

PAGE:FAULT_IN_NONPAGED_AREA

Technical information:

STOP: 00000050 (0xFFFFFADFAAEAF000,0X0000000000000001,0XFFFFFADFB0697FB0,0X000000000000000)

RXFCV.SYS - ADRESS FFFFFADFB0697FB0 base at FFFFFADFB0684000 datestamp 534e9868



I activated pagefile because not generate dump files. Normally job without pagefile system. Pending new death screen.

[Turi]

Hello, new crash.

Only start OS later open in safe mode and restart, the L2 storage full lost. Minidump not generated

Event viewer:

Tipo de suceso: Error
Origen del suceso: FancyCcV
Categoría del suceso: Ninguno
Id. suceso: 1
Fecha: 23/04/2014
Hora: 15:00:00
Usuario: No disponible
Equipo: ----
Descripción:
PrimoCache driver was not loaded correctly.
Datos:
0000: 00 00 08 00 01 00 62 00 ......b.
0008: 00 00 00 00 01 00 06 e0 .......à
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
0028: 60 90 2d b9 df fa ff ff `-¹ßúÿÿ



Not to do

[Support]

Event viewer:

This event is expected because primocache doesn't load its driver in the safe boot mode by design.

STOP: 00000050 (0xFFFFFADFAAEAF000,0X0000000000000001,0XFFFFFADFB0697FB0,0X000000000000000)RXFCV.SYS - ADRESS FFFFFADFB0697FB0 base at FFFFFADFB0684000 datestamp 534e9868

We have checked it. But so far we have no idea on the cause. It would be better if there is a minidump file generated.

The following link is for your reference if there is still no minidump file generated.
http://www.romexsoftware.com/en-us/know ... -file.html

BTW, can you send us your hardware configurations? And what is your level-2 storage?
Thanks!

[Turi]

The L2 cache are in SDD 16GB with eSATA port. One USB port powered the wire for SSD.

Yesterday, desactivated all USB ports power save mode, and when it goes well. No blue screen.

Maybe the SSD no powered for motherboard when needed.

Continue testing.

[Turi]

Nothing, new blue screen, USB power discarded.

I followed the instructions but I do not get to force minidump.



The PC:

Core 2 Duo 8400
GMA4500
3GB RAM
OS XP x64 SP2

I appreciated that the blue screen appears when more than 1GB writing on L2 cache, currently 5GB total. Depends on usage, sometimes the system fails before other, also reboot system.

[Turi]

I have tried several days with reduced size L2 cache MAX to 4096MB on the same initial storage space 5GB. ¡And job fine!

It seems that selecting maximum size fault...

[Support]

I have tried several days with reduced size L2 cache MAX to 4096MB on the same initial storage space 5GB. ¡And job fine!

Thanks for the information!