The error below is recorded in the Windows event logs when I changed SCSI ramdisk to Direct-IO as following:
-------------------------------------------------------------------------------------------------------------
Event Type: Error
Event Source: sr
Event ID: 1
Description-1: The System Restore filter encountered the unexpected error '0xC0000010' while processing the file 'RECYCLER' on the volume 'FancyRdRawPort0Target0'. It has stopped monitoring the volume.
Description-2: The System Restore filter encountered the unexpected error '0xC0000010' while processing the file 'RECYCLER' on the volume 'FancyRdRawPort0Target1'. It has stopped monitoring the volume.
Description-3: The System Restore filter encountered the unexpected error '0xC0000010' while processing the file 'Temporary Internet Files' on the volume 'FancyRdRawPort0Target2'. It has stopped monitoring the volume.
-------------------------------------------------------------------------------------------------------------
Remark:
[A]. I created 3 ramdisks (1) 'FancyRdRawPort0Target0' for P:\PAGE-RAM (384MB pagefile.sys only) (2)'FancyRdRawPort0Target1' for R:\RAMDISK (512MB system and user TEMP/TMP files) (3)'FancyRdRawPort0Target3' for S:\CACHE-RAM (512MB cahce files for IE8,Chrome19 Beta,Opera11.62,Firefox12beta, and junction points for Adobe and Flashplay cache files),
both 3 ramdisk on NTFS file system and Dynamic Memory Management enable at Windows 32bits perfessional SP3 operating system.
. My computer System Recovery was enable and run 'autorecovery.bat' batch file to create System Recovery point automatically after Windows start-up as following:
------------------------autorecovery.bat----------------------------------------------------------
echo CreateSystemRecoveryPoint.....
D:\CreateSystemRecoveryPoint.vbs
------------------------D:\CreateSystemRecoveryPoint.vbs---------------------------------------
Set IRP=getobject("winmgmts:\\.\root\default:Systemrestore")
MYRP=IRP.createrestorepoint("CreateSystemRecoveryPoint",0,100)
-------------------------------------------------------------------------------------------------------
Suspecious:
There are no problem if the ramdisks were created by SCSI disk type in the same configuration, so I doubt because of Direct-IO ramdisks did not be recognized by Windows Disk Management then got SR error,but SCSI ramdisks are visible in Windows Disk Management so no problem/error even both 3 ramdisks (P:\, R:\, S:\) System Recovery were enable.I can not disable both 3 Dirct-IO ramdisks (P"\,R:\,S:\) via Windows System Recovery console because ther are invisible in Windows Disk Management.
Please help to investigate it and any suggestion is appreciated, thank you in advance.How should I be able to get rid of this problem ?
The Direct-IO ramdisk performance much better than SCSI ramdisk, and I would like to keep autorecovery function automatically after each Windows Start-Up safely for system recovery.
Direct-IO ramdisk issue with Windows System Recovery enable
-
- Level 3
- Posts: 11
- Joined: Mon Apr 25, 2011 7:47 am
-
- Level 3
- Posts: 11
- Joined: Mon Apr 25, 2011 7:47 am
Re: Direct-IO ramdisk issue with Windows System Recovery ena
By the way,
Version under Primo Ramdisk Standard edition 5.4.0 (Multilingual).
Total system memory is 2GB in Thinpad R40 2723-3V2, however it is independent on hardware related issue, because it work very well if running SCSI ramdisks.
Version under Primo Ramdisk Standard edition 5.4.0 (Multilingual).
Total system memory is 2GB in Thinpad R40 2723-3V2, however it is independent on hardware related issue, because it work very well if running SCSI ramdisks.
Re: Direct-IO ramdisk issue with Windows System Recovery ena
I havn't reproduced the problem you mentioned yet.
However I think a temporary solution is to change the ramdisk file system from NTFS to FAT32 since sr.sys driver only attaches to the NTFS volume.
However I think a temporary solution is to change the ramdisk file system from NTFS to FAT32 since sr.sys driver only attaches to the NTFS volume.
Re: Direct-IO ramdisk issue with Windows System Recovery ena
well, I am sorry that the above solution may not work.
-
- Level 3
- Posts: 11
- Joined: Mon Apr 25, 2011 7:47 am
Re: Direct-IO ramdisk issue with Windows System Recovery ena
Have updated to version 5.5.0, but same error report still existence. The issue also existence in FAT32 format for Direct-IO ramdisk, I changed back to SCSI ramdisk temporary.
Your continue supporting is highly appreciated.
Your continue supporting is highly appreciated.
Re: Direct-IO ramdisk issue with Windows System Recovery ena
I'll keep you posted when we have any updates.
Thanks.
Thanks.