Re: [2021-01-30] PrimoCache 4.1.0 released!
Posted: Fri Apr 09, 2021 2:01 am
@Stateless, yes, this is planned in the next release. Thanks.
Technical Support and Help Center
https://forum.romexsoftware.com/en-us/
It was 120 seconds AFAIK, but we have to wait for primocache dev to get definitive answer.user4653453 wrote: ↑Fri May 28, 2021 4:02 pm Is it still a maximum amount of seconds when "average" is chosen as advanced defer-write option? i cant remember what it was before, but it was quite low?
I am also interested in this. Flushing ~10-20 GB at times to Raid5 (3x 8 TB) and it kills my array while writing 450 MB/s (flushing). If I could limit flushing speed to ~100 MB/s, this would still be fast enough and wouldn't kill the performance.user4653453 wrote: ↑Fri May 28, 2021 4:02 pm And any news about being able to limit how fast other defer-write options writes back to disk?
Yes agreed, would be very nicechaostheory wrote: ↑Sat May 29, 2021 8:35 am It was 120 seconds AFAIK, but we have to wait for primocache dev to get definitive answer.
I am also interested in this. Flushing ~10-20 GB at times to Raid5 (3x 8 TB) and it kills my array while writing 450 MB/s (flushing). If I could limit flushing speed to ~100 MB/s, this would still be fast enough and wouldn't kill the performance.
It's correct.chaostheory wrote: ↑Sat May 29, 2021 8:35 am It was 120 seconds AFAIK, but we have to wait for primocache dev to get definitive answer.
It's in our to-do list and given a high priority.chaostheory wrote: ↑Sat May 29, 2021 8:35 am Flushing ~10-20 GB at times to Raid5 (3x 8 TB) and it kills my array while writing 450 MB/s (flushing). If I could limit flushing speed to ~100 MB/s, this would still be fast enough and wouldn't kill the performance.
Verification does not seem to work, today my PC shut down due to power outage, after reboot L2 cache was wiped.New: Verify level-2 cache data on the next boot after an ungraceful shutdown, instead of simply cleaning all level-2 cache data.
Same for me, L2 reset hapened multiple times (LSI RAID + intel 750 L2) ... A primocache operations log with infos like L2-cache reconstruction ok or failure too would be nice !ccarderr wrote: ↑Sun May 30, 2021 6:05 pmVerification does not seem to work, today my PC shut down due to power outage, after reboot L2 cache was wiped.New: Verify level-2 cache data on the next boot after an ungraceful shutdown, instead of simply cleaning all level-2 cache data.
I have two NTFS partitions on local HDDs in Windows RAID0 configuration.