Page 1 of 2
BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Tue Jun 02, 2009 8:20 pm
by flu
VSuite Ramdisk Public 1.8.3601.2338, Windows XP SP3 32bit, 4GB of RAM.
Created the ramdisk 1016MB in size from the "invisible" memory (1020MB was free from the start) specifying that the contents of the ramdisk should be saved to C:\ramdiskz.vdf during the shutdown. The filesystem was FAT. Drive letter - Z:.
Rebooted. It looked like the shutdown went normally (something was saving to HDD). During the boot-up the system made OOPS. Error code: 0x000000D1 (0x0A0C865B, 0x000000FF, 0x00000001, 0x8A417023).
Crash dump was not created although it should have been according to system settings.
The size of the image file was exactly 1016MB as I've checked in SafeMode.
If the image file for the ramdisk is not enabled the system boots normally with the same settings.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jun 03, 2009 3:32 am
by Support
Thank you for your detail bug report.
We'd like to get some extra information regarding your problem.
1) Do you use "above 4G" option for your graphic adapter? For eg, on your BIOS setting, there may be an item called "IGP Memory Addressing" or similar item, the value can be "above 4G" or "below 4G". If use "above 4G", it will conflict with the ramdisk with Invisable Memory enabled.
2) Could you try to crate a ramdisk with 100MB IM used to test if the image file can be loaded normally?
3) Is it the first version (1.8.3601.2338) you used? Did you use the previous version before, for eg. V1.6.3518.2339? Just want to know if this problem occurrs only in v1.8.3601.2338.
Because there's no mini crash dump file created, a little hard for us to locate the root cause...
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jun 03, 2009 3:49 pm
by flu
support wrote:1) Do you use "above 4G" option for your graphic adapter? For eg, on your BIOS setting, there may be an item called "IGP Memory Addressing" or similar item, the value can be "above 4G" or "below 4G". If use "above 4G", it will conflict with the ramdisk with Invisable Memory enabled.
I have a discrete video card with 1GB of RAM onboard so I don't have any settings in BIOS concerning IGP memory addressing. My BIOS also doesn't have "memory remap" option.
2) Could you try to crate a ramdisk with 100MB IM used to test if the image file can be loaded normally?
That gave me another BSOD. But this time it occured right after I pressed the "Add" button in VSuite Ramdisk GUI. The settings were the same as in my first post except for the size of the ramdisk (100MB of IM this time). Also the crash dump was created. Windbg gave me this:
Code: Select all
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 6e0b8e44, memory referenced
Arg2: 000000ff, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 8a48641c, address which referenced memory
Debugging Details:
------------------
WRITE_ADDRESS: 6e0b8e44
CURRENT_IRQL: ff
FAULTING_IP:
+2e2952f00ffdfdc
8a48641c ?? ???
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xD1
TRAP_FRAME: 805513b4 -- (.trap 0xffffffff805513b4)
ErrCode = 00000002
eax=6e0b8e44 ebx=ffdffc70 ecx=ffdffc70 edx=00000f77 esi=ffdffc50 edi=8a517170
eip=8a48641c esp=80551428 ebp=80551450 iopl=0 nv up di pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010006
8a48641c ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from 8a48641c to 805446f0
STACK_TEXT:
805513b4 8a48641c badb0d00 00000f77 b811a162 nt!KiTrap0E+0x238
WARNING: Frame IP not in any known module. Following frames may be wrong.
80551424 b811a162 00000008 00000206 ffdffc70 0x8a48641c
80551434 80528799 ffdff000 8055c0c0 8055be60 intelppm!AcpiC1Idle+0x12
80551450 80545d4c 00000000 0000000e 00000000 nt!PopProcessorIdle+0xa9
80551454 00000000 0000000e 00000000 00000000 nt!KiIdleLoop+0x10
STACK_COMMAND: kb
FOLLOWUP_IP:
intelppm!AcpiC1Idle+12
b811a162 6a00 push 0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: intelppm!AcpiC1Idle+12
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: intelppm
IMAGE_NAME: intelppm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 48025183
FAILURE_BUCKET_ID: 0xD1_intelppm!AcpiC1Idle+12
BUCKET_ID: 0xD1_intelppm!AcpiC1Idle+12
Followup: MachineOwner
3) Is it the first version (1.8.3601.2338) you used? Did you use the previous version before, for eg. V1.6.3518.2339? Just want to know if this problem occurrs only in v1.8.3601.2338.
I used only 1.8.3601.2338.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jun 03, 2009 3:58 pm
by flu
If the ramdisk is created from the memory visible to OS no BSODs are occuring. Saving to & restoring from the image file works just fine.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jun 03, 2009 4:45 pm
by Support
hmmm, could you provide the hardware information, especially about CPU and motherboard? Are you using AMD cpu?
And could you send the this crash dump file to us?
[email protected]
From the crump file, problem is related to intelppm.sys. If you would like to help us do a test at first, you may disable this driver: at registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm
change the 'Start' value to '4'.
After reboot, create the ramdisk using 100MB IM again to see what would happen.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jun 03, 2009 9:43 pm
by flu
support wrote:hmmm, could you provide the hardware information, especially about CPU and motherboard? Are you using AMD cpu?
Q6700 + EP43-DS3LR
No. But I think I can provide you with some info from it. Just ask.
From the crump file, problem is related to intelppm.sys. If you would like to help us do a test at first, you may disable this driver: at registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm
change the 'Start' value to '4'.
After reboot, create the ramdisk using 100MB IM again to see what would happen.
Ramdisk created normally but after reboot during boot-up I got the same 0x000000D1 BSOD.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Thu Jun 04, 2009 4:12 pm
by Support
Well, we find a possible cause. But we cannot verify and dont know if it is relating to this problem. If you would like to help us do a test, we will send you the test version later.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Tue Jun 30, 2009 9:54 pm
by horizon
Hi All,
I just experienced something very similar.
1. I have enabled the usage of hidden memory and successfuly created and destroyed Ramdisk. (no image)
2. Than I have configured Ramdisk to use the hodden memory as well to use the image. (As soon as I have confirmed creation of the file and save on shutdown), the computer immediately reset.
3. After boot: I repeated (2) to eliminate any conflict. The same result, computer rebooted.
4. After boot: I have created/started the ramdrive without the image. (Everything ok.) Than I have enabled the image for that drive. (I confirmed the dialog, stating that some settings will be effective after the reboot.)
5. I initiated the restart. (Computer got stuck during the shutdown process.)
6. I restarted via power-off, power-on.
7. During the boot process, it crashed to bsod with the same bugcheck. (I cannot confirm the other arguments, because I don't remember them.) ( Crashdump wasn't created... The reason for this might be, that I have got pagefile completely disabled.)
My version is 1.8.3601.2338
My computer is Dell Latitude D630, 4GB ram. Ramdrive (512MB) is mapped to Z:, NTFS
Graphic card: Mobile Intel(R) 965 Express Chipset Family. (Probably, that it is integrated with shared memory or st. like that... I don;t have an access to bios, so I cannot check the settings.)
intelppm.sys: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) ... (I am a little bit hesitating to disable it, as it seems to be "Processor Device Driver". I assume, that disabling it will make the system use some compatibility diver... Which is something, I don't really want.)
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Wed Jul 01, 2009 12:50 am
by Support
Perhaps we can get a computer same type as yours later. We will try to solve this problem. So far we have received total 3 reports of this bug.
Re: BSOD 0x000000D1 at boot-up (saving to image file - enabled)
Posted: Thu Jul 09, 2009 10:27 am
by HalfHuman
hello
just installed ramdisk personal edition.
specs: dell optiplex 745, c2d 6700, 4gb ram (only 2,99 seen), onboard graphics (intel 3100), winxp pro sp3 32bit.
just got the same exception as the guys before me.
i'm using hidden memory. it crashed when i selected the option to use image file. if i do not select this option then all goes ok. the thing is that after i rebooted then it was also generating the same error. safe mode was not functional. what saved me was: "use the last settings that worked". (this is funny 'coz this option never vorked before in my relationship with windows xp
)
i've made disks sizes: 500mb, 1020mb, 1000mb. only thing that seemed to matter was wheteher image file was enabled or not. when trying to recreate a new drive using the old image size it also threw an error and windows just restarted. i think that the image file gets corrupted when windows tries to save it's content on windows shutdown.
please help.